NordicTrack C2300 NTL12905.5 - Manual (Page 26)

26
THE INFORMATION MODE
The console features an information mode that allows
you to view treadmill usage information, select a sys-
tem of measurement for the console, and turn on and
turn off the demo mode.
To select the information mode, hold down the Stop
button while inserting the key into the console, and
then release the Stop button.
When the information mode is selected, the display will
show the total number of hours that the treadmill has
been used and the total number of miles or kilometers
that the walking belt has moved. In addition, the display
will show the word ENGLISH or METRIC to indicate
which system of measurement is selected. To change
the system of measurement, press the Speed increase
button. The display will also show the words DEMO
MODE and the current setting: OFF, LOGO, ROAD, or
PROGRAMS (see step 5 on page 13). To change the
setting, press the Speed decrease button repeatedly.
To exit the information mode, remove the key from the
console.
THE OPTIONAL CHEST PULSE SENSOR
An optional chest pulse sensor adds even more fea-
tures to the console. The chest pulse sensor offers
hands-free operation, and enables you to use the two
heart rate programs.
To purchase the optional chest
pulse sensor, call the toll-free telephone number
on the front cover of this manual.
HOW TO ADJUST THE CUSHIONING SYSTEM
The treadmill features a cushioning system that re-
duces the impact as you walk or run on the treadmill.
To increase the firmness of the walking platform, step
off the treadmill and slide the cushion adjusters toward
the front of the treadmill. To decrease the firmness,
slide the cushion adjusters toward the back of the
treadmill.
Note: It may be helpful to lift on the walk-
ing platform as you slide the adjusters. Make sure
that both adjusters are set at the same firmness
level. The faster you run on the treadmill, or the
more you weigh, the firmer the walking platform
should be.
Cushion
Adjustor
Walking
Platform
Increase
Decrease
Cushion
Adjustor