NAD Theater 216THX - Manual (Page 2)

SPECIFICATIONS - NAD 216THX
Stereo Mode
Continuous Average Output Power 125W (21dBW)
(Minimum power per channel, 20Hz-20kHz both channels driven, with no more than rated distortion)
Rated distortion
(THD 20Hz-20kHz)
0.03%
Clipping power
(maximum continuous power per channel)
160W
IHF dynamic headroom at 8ohms +1.3dB
IHF dynamic power 8 170W (22.3dBW)
(maximum short term power per channel)
4 280W (24.5dBW)
2 400W (26dBW)
Slew rate >70V/sec
Damping factor
(ref. 8ohms, 50Hz)
>200
Input impedance 60k + 500pF
Input sensitivity
(for rated power into 8ohms)
1.1V
Voltage gain x 28.3 (29dBW)
Frequency response 20Hz-20kHz ±0.2dB
-3dB at 2Hz/100kHz
Signal/Noise ratio ref 1 W 98dB
ref. rated power 119dB
THD + SMPTE I.M. + IHF I.M. <0.03%
Bridged (Monophonic) Mode
Continuous Average Power Output into 8ohms 400W (26dBW)
(Minimum power per channel, 20Hz-20kHz,both channels driven, with no more than rated distortion)
IHF dynamic headroom at 8ohms +1.5dB
IHF dynamic power 8 560W (27.5dBW)
(maximum short term power per channel)
4 800W (29dBW)
Physical Specifications
Dimensions
(W x H x D)
435 x 146 x 383 mm
Net weight 14.2kg
Shipping weight 16kg
NOTE: NAD reserves the right to change specifications or design at any time without notice. All specifications are those in effect at time of printing.