Nextar N1-107 - Manual (Page 4)

Function 3:
Function 4:
You can edit the display order of pictures by using
application program. All pictures will be in sequential
order. New pictures will be arranged at the end of the
list. You can move the picture up or down by selecting
the picture and clicking the [Move Up/Move Down]
button.
In the USB mode, you can run the application
program to set the time interval for display.. The
shorter the time interval, the better the animation
effect..
Every picture is in normal scanning mode
named as Auto Advance Mode. For TFT LCD display,
many pictures can be shown sequentially in the Slide
Show mode.
In the USB mode, to activate static picture display,
click the No Slide Show setting in application program.
In this mode, the same picture will be shown when
the keychain is powered on and if the Up is not
pressed.
In the USB mode, you can edit the picture by
selecting the picture and pressing “Edit”. You can
view the edited picture in a small box, displayed on
the LCD.
: You can edit pictures only in the USB mode
Function 5:
Function 6:
Note
Function 2:
If the picture size is smaller than the display size,
the empty space will be filled with the background
color. You can select the background color - There
are 48 preset colors (see the figure below) .:
5 4