NEC LCD1501 - Manual (Page 11)

English
English-5
7. This LCD monitor is designed for use with a flexible arm. Please use the attached screws (4pcs) when mounting. To meet
the safety requirements the monitor must be mounted to an arm which guaranties the necessary stability under
consideration of the weight of the monitor. The LCD monitor shall only be used with an approved arm (e.g. GS mark).
Figure R.3
4 SCREWS (M4)
(MAX depth: 8.5 mm
)
If use other
screw, check
depth of hole.
Weight of LCD assembly: 2.8kg (MAX)
Replace screws
Tighten all screws
75 mm
75 mm
Thickness of bracket (arm)
2.0 ~ 3.2 mm
Specifications
Figure R.2
01_English 12/9/02, 4:10 pm 5