Nokia HDW-3 - Manual (Page 12)

12 Copyright ©2004 Nokia Mobile Phones. All rights reserved.
■ Switching the headset on or off
To switch on: Press and hold the power key for 2 seconds. The headset beeps and
the green indicator light starts blinking fast. The blinking continues slower after
the headset is connected to your phone.
To switch off: Press and hold the power key for 2 seconds. The headset beeps and
the red indicator light is displayed briefly.
■ Taking the headset into use for the first time
1. Make sure that your phone is switched on.
2. Switch on the headset.
3. Enter the Bluetooth menu of your phone and make sure that the Bluetooth
feature is activated.
4. Enter the submenu where you can set the phone to search for Bluetooth
devices, and start the search.
The phone searches for all Bluetooth devices within about 10 meters and
displays them as a list.
5. Select the headset from the list.
6. Enter the passcode 0000 to associate ("pair") and connect the headset to your
phone. If you do not pair the headset with the phone within 5 minutes, it will
power off, when pairing the headset for the first time.