NordicTrack APEX 6500 NTL18907.0 - Manual (Page 14)

14
HOW TO USE THE MANUAL MODE
Insert the key into the console.
See HOW TO TURN ON THE POWER on page
12.
Personalize console settings if desired.
See HOW TO PERSONALIZE CONSOLE SET-
TINGS on page 12.
Select the manual mode.
Each time the key is inserted, the manual mode
will be selected. If you have selected a program,
press the Programs buttons repeatedly until the
word MANUAL appears in the display.
Start the walking belt and adjust the speed.
To start the walking belt, press the Start button,
the Speed + button, or one of the twelve 1 Step
Speed buttons.
If the Start button or the Speed + button is
pressed, the walking belt will begin to move at 1
mph. As you exercise, change the speed of the
walking belt as desired by pressing the Speed +
and – buttons. Each time a button is pressed, the
speed setting will change by 0.1 mph; if a button
is held down, the speed setting will change in in-
crements of 0.5 mph. If one of the twelve 1 Step
Speed buttons is pressed, the walking belt will
gradually increase in speed until it reaches the se-
lected speed setting.
To stop the walking belt, press the Stop button. To
restart the walking belt, press the Start button, the
Speed + button, or one of the twelve 1 Step
Speed buttons.
Change the incline of the treadmill as desired.
To change the incline of the treadmill, press the
Incline increase or decrease button, or one of the
twelve 1 Step Incline buttons. Each time one of
the buttons is pressed, the incline will gradually
adjust until it reaches the selected incline setting.
Select a display mode and monitor your
progress with the display and the training zone
bar.
As you walk or run on the treadmill, the display
can show the following workout information:
• The elapsed time.
• The distance that you have walked or run.
• The speed of the walking belt.
• The incline level of the treadmill.
• The approximate number of calories you have
burned.
• The approximate number of grams of carbs
you have burned.
• Your heart rate. Note: Your heart rate can be
displayed only while you use the handgrip
pulse sensor or the optional chest pulse
sensor.
• In addition, the display can show a “workout
history”—a profile that represents the speed
settings that you select during your workout. At
the beginning of each minute of your workout,
an additional column will appear in the profile;
as you increase or decrease the speed setting,
the height of the column will increase or de-
crease.
• The display can also show an animation of a
runner on a road. As you increase or decrease
the speed setting, the runner will speed up or
slow down.
6
5
4
3
2
1