Nortel Networks Meridian M3902 - Manual (Page 129)

129
M3901 Feature Operation
Program a feature or an Auto Dial
Your network administrator may configure up to five features for your telephone.
The Features Card on the right side of the M3901 lists each feature and the Dial
Pad Number Key used to activate the feature.
After you press the Feature Key, you have 30 seconds to press a Dial Pad Number
Key or the process ends.
To activate a feature:
/ 1. Press the Features Key.
2. Press the Dial Pad Number Key
assigned to the feature you want to
use.
To deactivate the active feature:
/ 1. Press the Features Key.
£ 2. Press the £ Key.
To program an Auto Dial Key:
/ 1. Without lifting the handset, press the
Features Key.
2. Press the Dial Pad Number Key for the
Auto Dial position you want to
program. The Feature Activation
Indicator flashes.
3. Dial the number you want to program
to the Auto Dial position.
/ 4. Press the Features Key.
5. Press the Dial Pad Number Key for the
Auto Dial position you just
programmed.
Feature Fx
Feature Fx
Feature Fx
Feature Fx