Use call transfer – Nortel Networks Meridian M3902 User Manual
Page 131
131
M3901 Feature Operation
To make a Speed Call:
1. Lift the
handset
.
/
2. Press the
Features
Key.
3. Press the
Dial Pad Number
Key for the
Speed Call Controller feature or the
Speed Call User feature.
4.
Dial
the Speed Call code
of the
number you want to call.
The Speed Call feature automatically
dials the number.
Use Call Transfer
Use the Transfer feature to redirect a call to a third party.
To use the Transfer feature:
/
1. Press the
Hold
Key to put the active
call on hold.
Note:
The previous step is not required if
the Automatic Hold feature is active.
/
2. Press the
Features
Key.
3. Press the
Dial Pad Number
Key for the
Transfer feature.
4.
Dial
the number where you want to
transfer the call.
/
5. Press the
Features
Key when you hear
ringing tone.
6. Press the
Dial Pad Number
Key for the
Transfer feature.
Note:
On the Meridian SL-100 use steps
one to three then hang up. If you continue,
a three way conversation is established.
Feature
Fx
Hold
Feature
Fx
Feature
Fx