Selectable conferee display and disconnect – Nortel Networks Meridian M3902 User Manual

Page 56

Advertising
background image

56

Talk with more than one person

Selectable Conferee Display and Disconnect

You can view the list of active conferees by using the Conferee Selectable Display
Key and disconnect any party that has been added to the conference call. This
feature is not available on the Meridian SL-100 system.

To view active conferees:

1. While on a conference call, press the

Conferee Selectable Display

Key. The

LCD indicator turns on. With each key
press, the screen changes to show a
different active conferee.

Note:

This action has no effect on the

displays of the other telephones involved in
the conference.

/

2. Press the

Goodbye

Key. If configured,

the Conference Count Display returns.
The LCD indicator turns off.

To disconnect a conferee:

1. While on a conference call, press the

Conferee Selectable Display

Key. The

LCD indicator turns on. Continue to
press the key until the conferee you
want to delete appears on the screen.

2. Press the

Line

(DN) Key on which the

conference call is established. The
selected conferee is disconnected from
the call.

Note:

If there are additional conferees to

be disconnected, press the

Conferee

Selectable Display

Key until the conferee

that is to be disconnected is displayed on
the screen.

/

3. Press the

Goodbye

Key. If configured

the Conference Count Display returns
and is updated to reflect the revised
total count of conferees. The LCD
indicator tuns off.

ConfSelDsp

Goodbye

ConfSelDsp

2637

Goodbye

Advertising
This manual is related to the following products: