Power cable – Nokia Multimedia Car Kit CK-20W User Manual

Page 26

Advertising
background image

I n s t a l l a t i o n

26

Mount the microphone about 30 cm (11.8 inches) from the driver’s
head, and position it so that it points toward the driver’s mouth.
Experience has shown that the best mounting locations are near the
rear view mirror or the sun visor. Mount the microphone at least 1 meter
(3 feet) away from the car kit loudspeaker to avoid audio feedback.

Mount the microphone so that it is not exposed to air streams from the
vents. Do not place the microphone cable in the heating, ventilation, or
air-conditioning system. Use the supplied double-sided adhesive tape to
fix the microphone to reduce the amount of background noise of the car
that can interfere with your calls.

Insert the microphone plug into the microphone connector on the
hands-free unit, and turn the plug clockwise to lock it firmly. Use of any
other microphone than the microphone MP-2 supplied with the car kit
may impact the audio quality.

Power cable

The power cable has the following wires and fuses:

• +12 V, car battery +, red (1)

• Ground, car battery -, black (2)

• Car radio mute, yellow (3)

• Car ignition sense, blue (4)

• 2 A fuse (5)

• 1 A fuse (6)

To connect the power cable, do as follows:

1. Connect the black wire to the vehicle ground.

2. Plug the yellow wire into the mute connector of the car radio.

Advertising