Eizo CG243W - Manual (Page 27)

7 Chapter 3 Setting Monitor
-. Setting Language [Language]
This function allows you to select a language for the adjustment menu or displaying message.
Selectable languages
English/German/French/Spanish/Italian/Swedish/Japanese /Simplified Chinese/Traditional Chinese
Procedure
Choose <Menu Settings> menu from the Adjustment menu, and press
.
Choose <Language> from the <Menu Settings> menu, and press
.
Choose a language with or .
Press to exit the adjustment.
-6. Setting Range of Frequency [Signal Bandwidth]
Depending upon your operating environment, it may be necessary to set the frequency that corresponds
to your graphics board. If you install it for the first time or change environment, set the monitor.
NOTE
Refer to the manual of the graphics board.
These environment described below can be set regardless of whether or not the computer is running.
Only digital input signals can be set up. •
•
•
Procedure
Press to turn off the monitor.
Press holding down at least 2 seconds to turn on the monitor.
The Optional Settings menu appears.
Choose <Signal Baldwidth> from the <Optional Settings> menu, and press
.
Select “Normal” or “Wide” with
or , and press .
Use or
to select (or just confirm) the frequency that corresponds to your graphics board.
Setting CGW CGW
Horizontal scanning
frequency (kHz)
Vertical scanning
frequency (Hz)
Horizontal scanning
frequency (kHz)
Vertical scanning
frequency (Hz)
Normal
31 - 65 59 - 61 26 - 78 59 - 61
Wide
31 - 65 47.5 - 61 26 - 78 23.75 - 63
Select “Finish” with
or .
Press
to exit the Optional Settings.
The Optional Settings menu is closed.
1.
2.
3.
4.
1.
2.
3.
4.
5.
6.