NEC MT830 - Manual (Page 14)

E-13
Remote Control Precautions
• Do not look into the laser pointer while it is on.
• Do not point the laser beam at a person.
• When the cable is connected to the remote control, it will not
work in the wireless mode.
• Handle the remote control carefully.
• If the remote control gets wet, wipe it dry immediately.
• Avoid excessive heat and humidity.
• If you will not be using the remote control for a long time,
remove the batteries.
• Do not mix new and old or different types of batteries.
19 Slide Button
Press (+) to advance the next file or slide and (-) to return to
the previous file or slide. (the optional MT Viewer board
required)
20 Magnify Button
Use the (+) or (-) button to adjust the image size up to 400%.
When the Pointer is displayed, the magnified image is dis-
played at the center of the Pointer.
When the Pointer is not displayed, the magnified image is
displayed at the center of the screen.
21 Keystone Button
Press the (+) or (-) button to correct the keystone (trapezoi-
dal) distortion, and make the image square.
22 Focus Button
Press the (+) or (-) button to adjust the focus.
23 Zoom Button
Press the (+) button to zoom in and the (-) button to zoom
out.
24 Remote Jack
Connect your remote control cable here for wired operation.
NOTE: You cannot use Menu and Pointer at the same time.
OFF ON
PC CARD
VIDEO
RGB 1
MENU
R-CLICK/CANCEL
LASER
SLIDE VOLUME
S-VIDEO
POINTER
MAGNIFY
PIC-MUTE FREEZE
RGB 2
+
–
+ –
+
–
+
–
FOCUS KEYSTONE ZOOM
+
–
+
–
+
–
POWER
19
20
21
22
23
24