Navman LA000508 User Manual
Jupiter 20 gps receiver module, Data sheet
Advertising
LA000507G © 2006 Navman New Zealand. All rights reserved. Proprietary information and specifications subject to change without notice.
Jupiter 20
GPS receiver module
Data Sheet
Related documents
• Jupiter 20 Integrator’s manual LA000508
• Jupiter 20 Product brief LA000509
• Jupiter Series development kit guide
LA000645
• SiRF Binary protocol reference manual
• Navman NMEA reference manual
MN000315
• Jupiter 20 DR application note LA000433
• Low Power Operating Modes application
note LA000513
Advertising
Table of contents
Document Outline
- 1.0 Introduction
- 2.0 Technical description
- 3.0 Performance characteristics
- 4.0 Electrical requirements
- 5.0 Software interface
- 6.0 Dead Reckoning input specifications
- 7.0 Jupiter 20 development kit
- 8.0 Jupiter 20 mechanical drawing
- 9.0 Product handling
- 10.0 Ordering information
- 11.0 Glossary and acronyms
- Figure 2-1: Jupiter 20 module architecture
- Figure 8-1: Jupiter 20 mechanical layout
- Table 3‑1: TTFF acquisition times
- Table 3‑2: Software processing performance
- Table 3‑3: GPS receiver performance
- Table 3‑4: Position and velocity accuracy
- Table 4‑1: Operating power for the Jupiter 20
- Table 4‑2: Typical jamming performance
- Table 4‑3: Interface voltage levels
- Table 4‑4: J20D receiver pad functions
- Table 4‑5: J20/J20S receiver pad functions
- Table 5‑1: Jupiter 20 default baud rates
- Table 5‑2: Default NMEA messages
- Table 5‑3: Jupiter 20 software capability
- Table 6‑1: Gyro input specifications
- Table 10‑1: Jupiter 20 ordering information