NISSAN PATHFINDER R50 - Manual (Page 24)

24
Figure 1.1 Automatic Transmission
Figure 1.2 Torque converter bolts through starter hole.
Figure 2.1 Power Supply Routing
Figure 2.2 Relay Assembly, 96 model shown.
Figure 2.3 Relay Assembly, 97 and later.
Figure 3.1 Clutch kit from AutoZone
Figure 3.2 Clutch Dampener
Figure 3.3 Clutch transfer block, passenger
Figure 3.4 Blind hole puller tool.
Figure 3.5 Pilot bearing installed in crankshaft
Figure 3.6 Flywheel installed.
Figure 3.7 Clutch pressure plate torque sequence.
Figure 4.1 FS5R30A and TX-10 Assembly
Figure 4.2 Large plug
Figure 4.3 Automatic Transmission position switch
Figure 4.4 Bell housing sealant instructions
Figure 4.5 Bell housing bolt pattern and bolt torque information
Figure 4.6 Transmission Tunnel Covers
Figure 4.7 Tunnel Covers Assembled
Figure 4.8 Automatic Transmission motor mount red-drilled for Manual
Transmission.