Nikon S610 - S610c - Manual (Page 28)

16
First Ste
p
s
Charging the Battery Using the AC Adapter (COOLPIX S610c)
If you are using the COOLPIX S610c, insert a Rechargeable Li-ion Battery EN-EL12
(supplied) into the camera and charge the battery by connecting the AC Adapter
EH-63 (supplied).
1
Connect the power cable and AC adapter 1.
2
Confirm that the power-on lamp and the
monitor are off.
Do not turn the camera on. The battery cannot be
charged when the camera is on.
3
Connect the AC adapter to the camera’s multi connector 2.
The multi connector should be fully inserted.
4
Plug the power cable into an outlet 3.
The AC adapter power-on lamp will light 4.
C
Charging the Battery After Setting the Camera’s Clock
When the camera’s built-in clock has not been set, the battery begins charging when the AC
adapter is connected. Once the clock is set and the AC adapter is connected, the Picture Bank
start-up screen will be displayed and the camera will attempt to upload pictures to the my
Picturetown server. Press the
k button to cancel picture upload and charge the battery.
Picture Bank can be set so that it does not start automatically when the AC adapter is
connected. See the Wireless LAN Connection Guide for more information about Picture Bank.
5
The battery begins charging.
The power-on lamp (orange) will blink, and the battery will
start charging.
The power-on lamp (orange) stops blinking when charging
is complete.
A fully exhausted battery will recharge in about 150 minutes.
3
4
2
1