National Instruments NI PXI-5621 - Manual (Page 9)

© National Instruments Corporation 9 NI PXI-5621 Specifications
Electromagnetic Compatibility
CE, C-Tick, and FCC Part 15 (Class A) compliant
Electrical emissions................................ EN 55011 Class A at 10 m FCC
Part 15A above 1 GHz
Electrical immunity................................ Evaluated to EN
61326:1997/A1:1998, Table 1
Note For full EMC compliance, you must operate this device with shielded cabling. In
addition, all covers and filler panels must be installed. See the Declaration of Conformity
(DoC) for this product for any additional regulatory compliance information. To obtain the
DoC for this product, click Declaration of Conformity at
ni.com/hardref.nsf . This
Web site lists the DoCs by product family. Select the appropriate product family, followed
by your product, and a link to the DoC (in Adobe Acrobat format) appears. Click the
Acrobat icon to download or read the DoC.
Dimensions
PXI-5621 (1 PXI slot) ............................ 10 by 16 by 2.0 cm
(3.9 by 6.3 by 0.8 in.)
Certifications and Compliances
CE Mark Compliance
Conductive Immunity
When tested as specified in EN 61000-4-6 at 3 V
rms
, the spurious response
is within specifications except at the test frequency. A spurious signal of up
to –45 dBm may appear at the test frequency.