Navigon 33xx - Manual (Page 63)

User’s manual NAVIGON 33xx | 43xx max
Handsfree Module (only NAVIGON 4350 max) - 63 -
NAVIGON 4350 max
has found your Bluetooth device you can
initiate the pairing. (Refer to "Pairing with a device" on page 64.)
►
Tap on No if you want to initiate the connection later. (See chapter
"Searching for and pairing Bluetooth devices" on page 63)
Operating the hands-free module
All functions can be reached from the H
ANDSFREE M ODULE
window.
►
Tap on (Navigation) in order to move the navigation
application into the foreground.
►
Tap on (Back) in order to close the hands-free module and
return again to the previously opened window.
7.1 Connection with Mobile Phone
For you to be able to use the Bluetooth function of the
NAVIGON 4350 max
, the navigation device must be connected to the
Bluetooth device.
Note:
Both the NAVIGON 4350 max and the mobile phone must be
configured accordingly in order for a Bluetooth connection to be set up
between the two devices. Headsets are suitably configured at the
factory.
For details of how to configure the NAVIGON 4350 max refer to the
chapter "Settings" on page 72.
For details of how to configure the mobile phone or headset refer to the
related manual issued by the manufacturer.
7.1.1 Searching for and pairing Bluetooth devices
Pairing is the term used for setting up a coded connection between two
Bluetooth devices. This requires each of the two devices to send the
same password to respectively the other device. The password and the
connection data are saved on both devices, which means that pairing is
necessary once only when the connection is set up for the first time.
Paired devices are saved in the T
RUSTED D EVICES
list .
The NAVIGON 4350 max can connect automatically to the last
connected device as soon as it is within range.
The hands-free module of the NAVIGON 4350 max can save and
manage the connection data of up to three paired mobile phones and
one headset. From each paired mobile phone it is possible to import the
phone book and recent calls and to save this information with the
connection data.