NordicTrack ASR 630 831.23765.0 - Manual (Page 5)

5
ASSEMBLY
Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included hex keys and your own Phillips screwdriver , adjustable
wrench , and rubber mallet .
As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses
below each drawing is the key number of the part, from the PART LIST on pages 24 and 25. The number follow-
ing the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassem-
bled. If a part is not in the parts bag, check to see if it has been preassembled.
M8 x 23mm
Washer (31)–10
M8 Split
Washer (97)–16
M4 x 16mm
Round Head
Screw (92)–19
M8 Washer
(106)–2
M8 x 14mm Patch
Screw (84)–6
Wave Washer
(80)–2
M8 x 19mm Patch
Screw (86)–6
M8 x 23mm Shoulder
Screw (105)–2
M4 x 16mm
Screw (78)–4
M10 Split
Washer (99)–4
M10 x 80mm Button Screw (93)–4
M8 x 45mm Button
Screw (90)–6
Large Wave
Washer (89)–2
M8 x 23mm
Thin Washer
(96)–2
M4 x 16mm
Blunt Screw
(33)–2
M8 Nylon
Locknut (94)–2
M10 x 58mm Shoulder Bolt (104)–2
1. See HOW TO FOLD AND UNFOLD THE
ELLIPTICAL EXERCISER on page 12 and
unfold the elliptical exerciser.
While another person lifts the front of the
Frame (1), attach the Front Stabilizer (4) to the
Frame with two M10 x 80mm Button Screws
(93) and two M10 Split Washers (99).
4
93
99
1
1