New Balance 1800 - Manual (Page 11)

10
STEP 3 – Lowering the Walking Deck
Once the Treadmill is in the desired place, lower
the Deck by pushing in and turn the Knob counter-
clockwise until the Locking Indicator is not visible
and the Deck is released.
NOTICE: This Treadmill has a built-in safety feature to
help the Deck lower slowly when unfolding. Please
make sure there are no children or other things under
the Deck when you lower it.
power cord
STEP 4 – Power Cord Assembly
Attach Power Cord to Front Motor Cover and plug
unit cord into a dedicated outlet.
STEP 5 – Turning On the Treadmill
Turn the ON/OFF switch to the ON position.
ASSEMBLY AND SETUP ARE
NOW COMPLETE.
IMPORTANT:
Please read your owner’s manual before
beginning your workout for important
instructions on how to use your Treadmill.
on/off switch
TO REDUCE THE RISK OF DAMAGING ELECTRICAL PARTS TO
YOUR TREADMILL, WE STRONGLY RECOMMEND THAT YOU
PLUG YOUR TREADMILL INTO A DEDICATED 20 AMP OUTLET,
WITHOUT THE USE OF AN ADDITIONAL EXTENSION CORD.
PLEASE NOTE THAT THIS TREADMILL IS NOT
COMPATIBLE WITH GFCI-EQUIPPED OUTLETS.
IF YOUR TREADMILL HAS BEEN EXPOSED TO COLDER
TEMPERATURES, WE RECOMMEND THAT THE TREADMILL IS
WARMED UP TO ROOM TEMPERATURE BEFORE FIRST TIME
USE. FAILURE TO DO SO MAY CAUSE ELECTRONIC FAILURE.
CAUTION
WARNING
CRUSH HAZARD.
KEEP HANDS CLEAR OF DECK.
FAILURE TO DO SO COULD RESULT
IN CRUSHED HANDS.
locking
indica indicator
not visable
safety switch