NextBase SDV1102-D User Manual
Page 56
1.The followings show you how to fit the portable DVD player to the headrest
mount in the car.
1.Take out the headre st mount and fix it on the car chair.
2 Take out the backplate and fit it on the rear side of portable DVD playe r
.
Release the straps
Place the two mounting straps over
your headrest with the mount's
sponge facing the headrest .
Secure the mount by tightening
the straps
Fit the Portable
Player to
the Headrest Mount or VESA Wall Mounting Bracket
DVD
3.Gently slide the portable DVD player down by aligning the backplate groove with the headrest
mount until you hear the click sound. Then the installment is finished.
2.H ow to fit por table D VD player to the VESA wall m ounti ng bra cket
Connect the portable DVD player with the VESA wall mounting bracket with the middle four screw holes (there
are 4 gaskets for using).
Fit the screws in the six screw
where the arrow pointed
holes
Screw Size:M4*8
Gasket Size: 4.3*9*0.8mm
ENG
MOBILE ENTERTAINMENT
55
PDF 文件使用 "pdfFactory Pro" 试用版本创建