Niles Audio Niles ZR-4630 - Manual (Page 49)

49
CONNECTIONS
CONNECTING AN IR SENSOR FOR LOCAL SYSTEM CONTROL
IR Sensors installed in zones for hand-held IR remote control of the ZR-4630 and its source components can also
be used to control local components (i.e., a TV, DSS, DVD, and a surround-sound system located in the master
bedroom zone as shown in figure 38).
The IR Sensor connects normally to the Solo ™ Master Keypad to control the ZR-4630 and its connected source
components. In addition, the IR Sensor connects to a local IR repeating system (DATA and GND connections
only), to provide control of local components.
TV
Four Pair Twisted Cable
L R
AUDIO VIDEO
DSS
PHONE DIGITAL
L R
AUDIO VIDEO
DVD
RECEIVER
DIGITAL
L R
AUDIO
CD
DVD
Video 3
Video 2
Video 1
VIDEO FRONT
L
L
R
DIGITAL
1
2 R
CENTER
REAR
L
R
12V
D.C.
Niles IRP-6+
(provided for IR control
of local equipment)
Zone 6 – Master Bedroom
Distributed Equipment Location
Plugged into
Switched AC outlet
Niles
IRR-4D+
IR Sensor
Solo ™
Master
Keypad Module
RJ-45 Connector
for connection to
Numeric Accessory
Keypad Module
RJ-45 Connector
for connection to
Master Keypad
Module
RJ-45 Connector
for connection to
IR Sensors
Two Conductor Shielded Cable
(connect DATA and GND only)
Two Conductor
Shielded Cable
Three Wire to
RJ-45 Adapter
RJ-45 Connector for
connection to
the ZR-4630
Included
jumper cable
INPUT
OUTPUT
IR SENSOR SYSTEM
ACCESSORY
KEYPADS
Figure 38