NordicTrack NTBE04990 - Manual (Page 8)

8
5. Press a 25mm Round Cap (34) into the end of a
Weight Storage Tube (13).
While a second person holds the Middle Crossbar (5)
in the position shown, insert two M10 x 70mm Bolts
(29) through the bracket on the Weight Storage Tube
(13), through the left Brace (2), and through the
bracket on the Middle Crossbar (5). Thread an M10
Nylon Locknut (7) onto each Bolt. Do not tighten the
Nylon Locknuts yet.
5
5
2
7
13
29
29
34
6. Press a 25mm Round Cap (34) into the end of the
other Weight Storage Tube (13).
While a second person holds the Middle Crossbar (5),
insert two M10 x 70mm Bolts (29) through the bracket
on the Weight Storage Tube (13), through the right
Brace (2), and through the bracket on the Middle
Crossbar (5). Thread an M10 Nylon Locknut (7) onto
each Bolt. Do not tighten the Nylon Locknuts yet.
6
29
34
29
2
13
5
7
7. Have a second person hold the Top Crossbar (6)
between the Uprights (1). Make sure that the pull-up
bar is on the side shown.
Attach the Top Crossbar (6) to the left Upright (1) with
two M10 x 70mm Bolts (29), a Small Support Plate
(9), and two M10 Nylon Locknuts (7). Do not tighten
the Nylon Locknuts yet.
Attach the Top Crossbar (6) to the right Upright (1)
with two M10 x 70mm Bolts (29), a Small Support
Plate (9), and two M10 Nylon Locknuts (7). Do not
tighten the Nylon Locknuts yet.
7
29
9
29
7
7
7
6
7
Pull-up
Bar
9
29
29
1
1