Netopia 4652 - Manual (Page 33)

Easy Setup 6-33
DSL Line Configuration
1. Select Line Type and, from the pop-up menu, choose the type of circuit to which you will be connecting:
SDSL-ATM, SDSL-HDLC, or IDSL.
Note: If you choose IDSL, the router must reboot. A warning pop-up screen will appear before the reboot
occurs, allowing you to confirm your selection.
After reboot, the IDSL screen appears as shown:
SDSL Line Configuration
Line Type... SDSL-ATM
Operation Mode... Generic
Data Rate... 384
Data Link Encapsulation... PPP
PPP Mode... VC Multiplexed
Data Circuit VPI (0-255): 0
Data Circuit VCI (0-65535): 38
PREVIOUS SCREEN NEXT SCREEN
Return/Enter to select <among/between> ...
Enter Information supplied to you by your telephone company.
IDSL Easy Setup
Line Type... IDSL
Data Rate (kbps)... 144 (2B+D)
Data Link Encapsulation... PPP
TO MAIN MENU NEXT SCREEN
Return/Enter to select <among/between> ...
Enter information supplied to you by your ISDN phone company.