Nokia 1315 - Manual (Page 37)

M e s s a g e s
Copyright © 2006 Nokia. All rights reserved. 37
Set up voice mail with dialing
codes
1. Select Contacts > Speed dials .
2. Scroll to an empty speed dials
slot, and select Assign .
3. Enter your voice mailbox
number, including the area
code.
4. Refer to dialing codes, and
enter any codes as necessary
using the information that you
saved from
“Write down
number and process”, page 36 .
For example, if you pause for 5
seconds after connecting to
voice mail, enter p twice after
the voice mailbox number, for
example, 2145551212pp.
5. Enter any remaining pauses or
other information that allows
you to listen to your messages,
and select
OK .
6. Enter a name (such as voice
mail), and select OK .
To dial and listen to your voice
mail, press and hold the assigned
speed dials key in the standby
mode.
Automate voice mail
You can automate voice mail with
dialing codes. For more
information, see
“Save voice mail
dialing code”, page 36 .
■ Picture messages
Picture messaging is a network
service. If your wireless service
provider supports this feature,
your phone comes with five
preloaded pictures. Pictures can be
attached to a message and sent
using text messaging to
compatible phones. Picture
messages behave the same as text
messages, but pictures take up
more space than text. Pictures are
stored in the
Templates folder at
Menu > Messages > Text
messages > Templates .
Note: Picture message
function can be used only if
it is supported by your
network operator or service
provider. Only compatible
devices that offer picture
message features can
receive and display picture
messages.
Copyright protections may prevent
some images, music (including
ringing tones) and other content
from being copied, modified,
transferred, or forwarded.
Write and send
When a picture is added to a text
message, the message converts to
picture message. The message
counter in the upper right of your