Part identification chart – NordicTrack NTSA03991 User Manual
Page 4
Advertising
4
Part Identification Chart
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST in the center of this manual. Note: Some small parts
may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.
3/8" x 2" Bolt (121)
3/8" Flat Washer (120)
1/4" x 3/4" Bolt (130)
3/8" Nylon Locknut (118)
3/8" x 3 1/4" Bolt (124)
3/8" x 2 3/4" Bolt (125)
3/8" Nylon Jam Nut (122)
1/4" x 1 1/2" Bolt (131)
3/8" x 3" Bolt (117)
3/8" x 3 3/4" Bolt (110)
3/8" x 5" Bolt (123)
3/8" x 3" Carriage Bolt (115)
3/8" x 3 3/4" Carriage Bolt (119)
5/8” x 1/4” Spacer (127)
1/4" Nylon Locknut (128)
Advertising