Nokia 3586I - Manual (Page 96)

[ 87 ]
Advanced features
Store the feature codes
Before you can use the Send own caller ID when calling feature, you
must store the feature codes for activating this feature. Once the code is
stored in your phone, it is sent automatically to the network when you
select this option from your phone’s menu.
1 Press Menu 4-7-5 (Settings > Network services > Network
feature setting). The Feature code field appears after a few seconds.
2 Enter the feature code your service provider gave you (example *67
for activating Send own caller ID when calling), then press OK.
3 Select No to assign the activation code.
Place a call without sending your number
1 Press Menu 4-7-4 (Settings > Network services > Send own caller
ID when calling).
2 Scroll to No, then press Select.
3 Enter the desired phone number, then press OK (or press Search to
recall a phone number from the phone book).
The phone automatically inserts the feature code into the dialing string
and dials the phone number. The person you are calling cannot see your
phone number on their caller ID.
• USE AUTOMATIC REDIAL
There are times when you may not be able to place a call (example: due
to the high volume of traffic on the wireless network). When the wireless
network is busy or unavailable, Automatic redial instructs your phone to
retry the call.
ACTIVATE AUTOMATIC REDIAL
1
Press Menu 4-1-3 (Settings > Call settings > Activate
automatic redial).
2 Scroll to On and press Select.