Heater operation -12 – NISSAN 2008 Altima Coupe User Manual

Page 168

Advertising
background image

— Air flows from center and side

ventilators and foot outlets.

— Air flows mainly from foot outlets.

— Air flows from defroster outlets

and foot outlets.

— Air flows mainly from defroster

outlets.

Temperature control dial

The temperature control dial allows you to adjust

the temperature of the outlet air. To lower the

temperature, turn the dial to the left. To increase

the temperature, turn the dial to the right.

Air recirculation button

On position (Indicator light on):

Interior air is recirculated inside the vehicle.
Press the

button to the on position when:

● driving on a dusty road.
● to prevent traffic fumes from entering pas-

senger compartment.

● for maximum cooling when using the air con-

ditioner.

Off position (Indicator light off):

Outside air is drawn into the passenger compart-

ment and distributed through the selected outlet.
Use the off position for normal heater or air con-

ditioner operation.

Air conditioner button

The button is provided only on vehicles equipped

with an air conditioner.
Start the engine, turn the fan control dial to the

desired position and push the

button to

turn on the air conditioner. The indicator light

comes on when the air conditioner is operating.

To turn off the air conditioner, push the

button again.
The air conditioner cooling function oper-

ates only when the engine is running.

Rear window defroster switch

For more information about the rear window de-

froster switch, see “Rear window and outside

mirror (if so equipped) defroster switch” in the

“Instruments and controls” section of this manual.

HEATER OPERATION

Heating

This mode is used to direct heated air to the foot

outlets. Some air also flows from the defrost

outlets.

1. Press the

button to the OFF position

for normal heating.

2. Press the

air flow control button.

3. Turn the fan control dial to the desired posi-

tion.

4. Turn the temperature control dial to the de-

sired position between the middle and the

hot position.

Ventilation

This mode directs outside air to the side and

center ventilators.

1. Press the

button to the OFF position.

2. Press the

air flow control button.

3. Turn the fan control dial to the desired posi-

tion.

4. Turn the temperature control dial to the de-

sired position.

4-12

Monitor, climate, audio, phone and voice recognition systems

REVIEW COPY—

2008 Altima (alt)

Owners Manual—USA_English (nna)
02/13/08—debbie

Advertising