NEC C944 - Manual (Page 40)

38
Blocking or
receiving calls
Menu Caller Filter OK Filter Options OK …
select Accept List or Block List OK .
The selected mode is marked ”“” and the filter is activated!
When the filter is active, the handset is showing the ”icon filter
active” (
B ) on the idle display.
Caution - If the filter mode is set to receive and the caller filter
is activated, the numbers in the caller filter are the only num-
bers, from which the calls will be received by the phone !
Example:
If the characters ”0S” are entered as a number in the caller filter
and the filter mode is set to receive, only calls beginning with
the digits ”0” (external numbers) will be received by the phone.
Deactivate
Filter
until Filter off OK
The deactivated caller filter is marked ”“”. To switch it on again
you have to select “Accept List“ or “Block List“.
Wild Card
Feature
When entering numbers in the caller filter a wild card feature is
provided, so that a group of numbers is selected as entries in
the caller filter.
Example:
If the characters ”0S” are entered as a number in the caller fil-
ter, all numbers beginning with the digit ”0” (external numbers)
are selected as entries in the caller filter.
If only the character ”S” is entered as a number in the caller fil-
ter, all numbers are selected as entries in the caller filter.
Remember - when using the wild card function, the ”S” char-
acter must always be the last character entered in the number.
Transferring
Phone
Numbers to
the Caller
Filter
For transferring phone numbers from the Telephone Book, the
Redial List and the Caller List to the Caller Filter refer to:
Menu: Telephone Book Settings,
Menu: Redial List and
Menu: Caller List.