NISSAN 2011 Altima Hybrid - Manual (Page 266)

8. Select the voice command to be learned by
the system. The voice recognition system
starts.
9. The system announces, “Please say a
command”.
10. After the tone sounds and the icon on the
screen changes from to ,
speak a command.
11. When the system has recognized the voice
command, the voice of the user is learned.
Press “Back” once to return to the previous
screen.
INFO:
With “Continuous Learning” set to on, the sys-
tem does not go back to the command list
screen, allowing to continue voice command
learning by the system.
12. If the system has learned the command
correctly, “None” will change to “Stored”.
NVR0040 NVR0041 NVR0042
9-30 Voice recognition