Nokia XPRESSMUSIC 5530 - Manual (Page 145)

WLAN network name — Select Enter manually or Search for networks . If you
select an existing network, WLAN network mode and WLAN security mode are
determined by the settings of its access point device.
Network status — Define whether the network name is displayed.
WLAN network mode — Select Ad-hoc to create an ad hoc network and to allow
devices to send and receive data directly; a WLAN access point device is not needed.
In an ad hoc network, all devices must use the same WLAN network name.
WLAN security mode — Select the encryption used: WEP , 802.1x (not for ad hoc
networks), or WPA/WPA2 . If you select Open network , no encryption is used. The
WEP, 802.1x, and WPA functions can be used only if the network supports them.
Homepage — Enter the web address of the starting page.
Use access point — Select After confirmation if you want the device to ask for
confirmation before the connection using this access point is created or
Automatically if you want the device to connect to the destination using this access
point automatically.
To enter the settings for the selected security mode, select WLAN security
settings .
Security settings for WEP
WEP key in use — Select the wired equivalent privacy (WEP) key number. You can
create up to four WEP keys. The same settings must be entered on the WLAN access
point device.
Authentication type — Select Open or Shared for the authentication type
between your device and the WLAN access point device.
WEP key settings — Enter WEP encryption (length of the key), WEP key
format ( ASCII or Hexadecimal ), and WEP key (the WEP key data in the selected
format).
Connectivity 145
© 2010 Nokia. All rights reserved.