Network Computing Devices Iridium/GPS Terminal D3000 - Manual (Page 10)

Blue Sky Network August 07
8 D3000 100458
D3000 ICB (Iridium LBT, Cable, Bracket)
The D3000 ICB (p/n 100420, below) is pre-assembled and provided with each D3000 unit to be
installed. The ICB Set provides the D3000 unit with the following capabilities: power connection
(“red”), Iridium antenna (“blue”), serial communication (“yellow”) and bracket holes for mechanical
installation flexibility.
ICB Components (without the cable) Pre-Assembled D3000 ICB Set
The ICB can be assembled directly into any surface with the appropriate hole configuration or
bottom Velcro tape (for “Quick Install”). In addition, it can be used with a suction RAM mount,
which allows for higher mechanical flexibility and better visualization of the front panel. The Velcro
tape on the bottom of item 4 (above) is the quickest and easiest way to position the unit in a
dashboard, for example, but other installations using screws are also viable options.
In order to install the ICB in a “fixed” configuration over a surface (with screws), the installer will
need to first understand the configuration of the holes on the bracket (item 4, above). The drawing
in the next page shows the bracket details, including the dimensions of the four center holes (for
standard RAM mounts) and the two holes on each side (that can also be used to fix the unit).