National Products DS90C3202 - Manual (Page 4)

Electrical Characteristics
(Continued)
Over recommended operating supply and temperature ranges unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Units
RECEIVER SUPPLY CURRENT
ICCRW Receiver Supply Current
Worst Case
(Figures 2, 4)
C
L
= 8 pF,
Worst Case
Pattern
Default Register
Settings
f = 8 MHz 65 130 mA
f = 135 MHz 375 550 mA
ICCRG Receiver Supply Current
Incremental Test Pattern
(Figures 3, 4)
C
L
= 8 pF,
Worst Case
Pattern
Default Register
Settings
f = 8 MHz 55 120 mA
f = 135 MHz 245 400 mA
ICCRZ Receiver Supply Current
Power Down
PDWNB = Low
Receiver Outputs stay low
during Powerdown mode.
Default Register Settings
2 mA
Note 1: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the device
should be operated at these limits. The tables of “Electrical Characteristics” specify conditions for device operation.
Note 2: Typical values are given for V DD = 3.3V and T A = +25˚C.
Note 3: Current into device pins is defined as positive. Current out of device pins is defined as negative. Voltages are referenced to ground unless otherwise
specified.
Note 4: The worst case test pattern produces a maximum toggling of digital circuits, LVDS I/O and LVCMOS/LVTTL I/O.
Note 5: The incremental test pattern tests device power consumption for a “typical” LCD display pattern.
Note 6: Figures 2, 3 show a falling edge data strobe (RCLK OUT).
Note 7: Figure 8 show a rising edge data strobe (RCLK OUT).
DS90C3202
www.national.com 4