Numark Industries AXIS 8 - Manual (Page 13)

AXIS 8
MOVING LOOP POINTS
The “LOOP IN” point can be moved while the music is
playing just by pressing at the new desired point.
The next time “LOOP OUT” is reached the CD will return to
this new “LOOP IN” point. If “LOOP IN” is press after the
“LOOP OUT” point it will clear the “LOOP OUT” point.
The “LOOP IN” point can also be edited while paused. First
hold down then press to move to the loop in
point.
Next rotate the wheel to search for a new cue point
and then press again to set the new point.
Check your point by pressing .
The “LOOP OUT” point can also be moved while a
loop is playing. Press to release the old
“LOOP OUT” point and pressing it again at the new
desired point.
RELOOP/STUTTER This button performs 2 different functions depending on loop setting.
Reloop is only possible if “LOOP” points have been
previously set. The “RELOOP” function automatically returns
the music to the “LOOP IN” point and will play the loop until it
is released with the “LOOP OUT” button.
Stutter starts instant play from previously set “Hot” points.
Simply set your stutter (Hot Start) point by follow the
directions for setting loop in because the points are the same.
Remember the button serves also for the reloop function
so if a loop out has been set the unit will also loop until
released. This function lets you set 3 Hot Start points. The
first is based on the “PLAY” cue point and the second two are
based upon “LOOP IN”. Since the default “LOOP IN” points
are also the initial start point your unit can be “stutter” started
from up to 3 buttons.
NOTE: The CD Player will always remember a new set “Hot” points until you actually set a new “LOOP IN” point
or put in a new CD. The new point will be accessible until you remove the CD from the unit.
If you change tracks and you previously set a “Loop In” on another track, pressing will jump to that point.
- The Leader in DJ Technology
©2002 Numark Industries - 13 - http://www.numark.com