Propane only, Rear cart panel installation, Condiment basket / propane tank mount installation – Napoleon Grills 485RSIB User Manual

Page 18

Advertising
background image

18

www.napoleongrills.com

6 x N570-0080 (#14 x 1/2”)

3/8”(10mm)

5. Rear Cart Panel Installation

Fit rear cart panel between the two end panels; ensure large hole in panel is to the bottom right corner as illustrated.
Fasten using (6) #14 x 1/2” screws, three on each side.

6. Condiment Basket / Propane Tank Mount Installation

Rotate basket slightly to allow wire to enter the holes in the side panel. Push through and upwards, rotating to allow the
bend in the wire to pass through the holes. Lay basket flat against the side panel. Clip top propane tank mount into slots in
back panel. Insert one end at a time, gently bending wire. (When not in use tank mount will lay flat against back panel).

Propane Only

Advertising