2 identification and serial number, 3 declaration of conformity, Logbook – Navigon PNA 2110 User Manual

Page 51

Advertising
background image

User's manual

NAVIGON 2100 | 2110

Appendix

- 51 -

12.2

Identification and serial number

The navigation device has been provided with various identification
labels which can be found beneath the cover on the back of it. (e.g. CE
label, serial number, ....)
If you need to see any of these labels, please proceed as follows:
Insert a sharp object (e.g. a knife or a small screwdriver) in the slot
between the device and the rear cover.
Twist the object used so that the rear cover opens.

Note: When closing the cover, ensure that it sits properly! If it is seated
incorrectly, the microphone may be covered over.

12.3

Declaration of Conformity

Products with the CE marking comply with Radio & Telecommunication
Terminal Equipment Directive (R&TTE) (1999/5/ECC), the
Electromagnetic Compatibility Directive (89/336/ECC) and the Low
Voltage Directive (73/23/ECC) – as amended by Directive 93/68/ECC -
issued by the European Community Commission.
Accordance with these directives implies conformity with the following
European Standards:
EN301489-1
EN301489-3
EN55022
EN55024
EN61000-3-2
EN61000-3-3
IEC 60950
The manufacturer is not liable for modifications made by the user which
may alter the device's conformity with the CE label, nor the
consequences thereof.

Advertising