NHT SuperOne Ci - Manual (Page 2)

Thank you for your purchase of the NHT SuperOne Ci in-wall loudspeaker. Please take a few minutes to read through this
Owner's Manual prior to installing your new speakers. The information provided will help you to obtain maximum perfor-
mance from your audio system. If you have questions or need assistance at any time during the installation or operation
of your new speakers, please call your NHT Dealer or our Toll-Free Customer Hotline at:
1-800-NHT-9993
„ „ Design
NHT loudspeakers are designed to deliver refined, musical sound from attractive and affordable packages. Our efforts are
guided by the study of human hearing and are optimized for real-world use. Every NHT speaker undergoes rigorous test-
ing and quality control at the factory to ensure you years of listening pleasure.
The SuperOne Ci is designed to deliver the sonic performance and value of NHT’s acclaimed SuperOne freestanding
loudspeaker, while offering the invisibility of in-wall installation. Its custom-designed drive units are mounted in a rigid
baffle/bezel assembly designed to minimize the audible effects of unwanted vibrations and resonance. The mounting
assembly is designed to be intuitive and flexible, making it ideal for new or existing construction. With high performance
sonics and a paintable face, the SuperOne Ci is the perfect solution for architectural audio and home theater installations.
Caution: The SuperOne Ci should be installed by an experienced and licensed custom installation professional. Be sure
that the installer possesses sufficient skill, the proper tools, knowledge of local fire and building codes, and a familiarity
with the structure of the building (especially wall and/or ceiling materials, layouts, electrical and plumbing lines, etc.).
„ „ Placement
The SuperOne Ci is designed for in-wall installation between stan-
dard 2” x 4” wood studs. Installation in outdoor locations or in mois-
ture-prone interior environments such as indoor swimming pools or
saunas is not recommended.
Spend some time considering speaker placement prior to installing
the SuperOne Ci. Once the speakers are installed, they are per-
manent, so their location should be selected carefully. Mount the
speakers in a location where they face the listening area without
obstruction from furniture, and preferably at least three feet from
side walls. The speakers should be mounted on a flat surface to
ensure a good seal between the baffle and the mounting surface.
For optimal imaging, position the speakers so that the distance
between the listening position and the wall is 1.5 times the distance
SuperOne Ci Specifications
· System Type: 2-way in-wall design
· Driver Complement: 6.5” long-throw woofer, 1” fluid-cooled soft dome tweeter
· Crossover: 2.6KHz, 6dB/octave high-pass and 12dB/octave low-pass
· Response: 50Hz - 20KHz, +/- 3dB
· Sensitivity: 86.5db (2.83V at 1M)
· Impedance: 8 ohms nominal
· Recommended Amplifier Power: 10W/ch minimum, 100W/ch maximum
· Inputs: Professional grade spring posts
· Weight: 3.8 lbs. each
· Dimensions: Cutout 12-1/8"H x 8"W; Bezel 13-1/8”H x 9”W; Depth behind wall 2-3/4”
· Finish: Matte white (paintable)
Specifications are subject to change without notice, in accordance with our policy of continuously upgrading the performance of our products.
fig.1