NordicTrack 1900i NATL82205.0 - Manual (Page 26)

26
THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been used and the total number of kilometers that the
walking belt has moved. The information mode also al-
lows you to select kilometres or miles as the unit of
measurement for the console, to turn on and turn off
the demo mode, and to reset all programs to the origi-
nal settings.
To select the information mode, hold down the Stop
button while inserting the key into the console. When
the information mode is selected, the following informa-
tion will be shown in the display:
The Time zone of
the display will
show the total
number of hours
that the treadmill
has been used.
The Odometer
zone will show
the total number
of kilometres that the walking belt has moved. An “M”
for metric kilometres or an “E” for English miles will ap-
pear in the Pace/Speed zone. Press the Speed in-
crease button to change the unit of measurement if de-
sired.
IMPORTANT: If a “d” appears in the Heart Rate/
Calories zone of the display, the console is in the
“demo” mode. This mode is intended to be used only
when a treadmill is displayed in a store. When the con-
sole is in the demo mode, the power cord can be
plugged in, the key can be removed from the console,
and the indicators in the display will automatically light
in a preset sequence, although the buttons on the con-
sole will not operate.
If a “d” appears when the infor-
mation mode is selected, press the Speed decrease
button so the “d” disappears.
To reset all programs to the
original settings, first press the
Start button. The word “SAVE”
will flash in the Pace/Speed
zone of the display. To reset
all programs, press the Save
button. If you do not wish to reset all programs, press
the Stop button.
To exit the information mode, remove the key from the
console.
HOW TO ADJUST THE CUSHIONING SYSTEM
The treadmill fea-
tures an ad-
justable cushion-
ing system that
reduces the im-
pact as you walk
or run on the
treadmill. To in-
crease the firm-
ness of the walk-
ing platform, turn
the adjustment
knob counterclockwise. To decrease the firmness, turn
the knob clockwise.
Note: The faster you run on the
treadmill, or the more you weigh, the firmer the
cushioning system should be.
Kilometers
Hours
Adjustment
Knob