NordicTrack APEX 6000 NTL21005.0 - Manual (Page 21)

21
THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps
track of treadmill usage information. The information
mode also allows you to select miles or kilometers as
the unit of measurement for speed and distance and to
turn on and turn off the demo mode.
To select the information mode, hold down the Stop
button while inserting the key into the console, and
then release the Stop button. When the information
mode is selected, the following information will be
shown in the display:
The priority dis-
play will show the
total number of
hours that the
treadmill has
been operated.
The lower right
corner of the dis-
play will show the
total number of miles (or kilometers) that the walking
belt has moved. In addition, an “E” for English miles or
an “M” for metric kilometers will appear in the lower left
corner of the display. Press the Speed increase button
to change the unit of measurement if desired.
Note: The con-
sole features a
demo mode, de-
signed to be used
if the treadmill is
displayed in a
store. While the
demo mode is
turned on, the
console will function normally when you plug in the
power cord, switch the reset/off circuit breaker to the
“off” position, and insert the key into the console.
However, when you remove the key, the display will
remain lit, although the buttons will not function. If the
demo mode is turned on, a “d” will appear in the lower
left corner of the display while the information mode is
selected. To turn on or turn off the demo mode, press
the speed decrease button.
To exit the information mode, remove the key from the
console.
THE OPTIONAL CHEST PULSE SENSOR
The optional chest pulse sensor offers hands-free op-
eration as it monitors your heart rate during your work-
outs.
To purchase a chest pulse sensor, call the
telephone number on the front cover of this manual.