NEC NP41 - Manual (Page 52)

3
. Usng the Vewer (NP/NP)
Enterng Characters
To enter or change [DEVICE NAME] and [PASSKEY] at the use of Bluetooth® USB adaptor, use the character en-
try screen (software keyboard).
This section uses an example of entering a passkey to describe how to enter characters.
When you select [CHANGE] of [PASSKEY] from the [OPTIONS] menu, the character entry screen will be dis-
played.
Enterng characters
1. Press the seleCt ▼ button.
The cursor will move to the character type section.
2. Press the seleCt ◀ or ▶ button.
The character type will be changed in the order of [ABC], [abc],
and [123].
3. Move the cursor to select the character type section
and press the seleCt ▼ button.
The cursor will move to the character field.
4. Move the cursor to select a character and press the en-
ter button.
The character will be displayed in the entry field.
5. after completing entry, press the seleCt ▼ button and
move the cursor to select [OK] and the enter button.
The entry will take effect.
• To cancel, move the cursor to select [CANCEL] and press
the ENTER button.
Entry field