Nvidia Video Card GeForce MX Series - Manual (Page 17)

18
4. Video Mirror Function
4.1.1 Video Mirror mode
Video Mirror is a nView feature that allows a video or DVD application to
mirror its playback in full-screen mode on any one of the connected display
devices.
For Video Mirror functionality, set your nView panel to one of these
modes:
• Windows XP/2000 Clone or Windows XP DualView.
• Windows 9X/ME Clone or Extended Desktop.
1. Open the DVD or video application that you
want to view.
2. A. Enable Overlay Controls
B. Enable video overlay zoom: Click this
check box and click Apply to use the
Zoom control slider to zoom in (out) on a
specific area of the video output
(overlay) on your screen. Using the
diagram of the screen regions shown on
the Overlay Controls panel, you can
select the area of the video screen you
would like to zoom. Once selected, you
can zoom to that portion of the screen by
moving the Zoom Control slider between
the Out and In range.
3. Be sure to click Apply whenever you make
any changes to the control panels. If changes
do not take effect (the controls have no effect
on the video) after you click Apply, close the
video overlay and then re-open it.