Care & maintenance of side burner, Trouble shooting – Nexgrill 720-0025 LP User Manual

Page 16

Advertising
background image

sand very lightly with dry 100 grit emery papers in the
direction of the grain. Specks of grease can gather on the
surfaces of the stainless steel and bake on to the surface
and give the appearance of rust. For removal use an
abrasive pad in conjunction with a stainless steel cleaner.

GRILL RACK
The easiest way to clean the grill is immediately after
cooking is completed and after turning off the flame.
Wear a barbeque mitt to protect your hand from the heat
and steam. Dip a brass bristle barbeque brush in tap
water and scrub the hot grill. Dip the brush frequently in
the bowl of water. Steam, created as water contacts the
hot grill, assists the cleaning process by softening any
food particles. The food particles will fall and burn. If
the grill is allowed to cool before cleaning, cleaning will
be more difficult.


GRILL BURNERS
Extreme care should be taken when moving a burner as it
must be correctly centered on the orifice before any
attempt is made to relight the grill. Frequency of
cleaning will depend on how often you use the grill.

GRILL BURNER CLEANING
Ensure the gas supply is off and the knobs are in the
“OFF” position. Make sure the grill is cool. Clean the
exterior of the burner with a wire brush. Clear stubborn
scale with a metal scraper. Clear any clogged ports with
a straightened paper clip. Never use a wooden toothpick
as it may break off and clog the port. Please note if
insects or other obstructions are blocking the flow of gas
through the burner, you will need to call our customer
service line.

CARE & MAINTENANCE OF SIDE BURNER


ENSURE THAT THE GAS SUPPLY AND THE
KNOBS ARE IN THE “OFF” POSITION. MAKE
SURE THE RANGETOP BURNER IS COOL
BEFORE REMOVAL.

BURNER CLEANING:
Clean the exterior of the burner with a wire brush. Clear
any clogged burner ports with a straightened paper clip.
Never enlarge the burner ports. Never use a wooden
toothpick as it may break off the clog the port.

GREASE TRAY CLEANING:
The grease tray should be emptied and wiped down
periodically and washed in a mild detergent and warm
water solution. A small amount of sand or cat litter may
be placed in bottom of grease tray to absorb the grease.


STAINLESS STEEL:
There are many different stainless steel cleaners
available. Always use the mildest cleaning procedure
first, scrubbing in the direction of the grain. Do not use
steel wool as it will scratch the surface. To touch up
noticeable scratches in the stainless steel, sand very
lightly with dry 100 grit emery papers in the direction of
the grain.

TOP BURNER GRATE:
The top burner grate is stainless steel. To avoid burns do
not clean a hot grate. They may be wiped while in place
with hot, soapy water, rinsed and wiped dry. Never
immerse a hot grate in water.

TROUBLE SHOOTING

SPIDER AND INSECT WARNING!!!
Spiders and insects can nest in the burners of this or any other grill, and cause the gas to flow from the front of the burner.
This is very dangerous condition, which can cause a fire to occur behind the valve panel, thereby damaging the grill and
making it unsafe to operate.

WHEN TO LOOK FOR SPIDERS
You should inspect the burners at least once a year or immediately if any of the following conditions occur:
1. The smell of gas in conjunction with the burner flames appearing yellow.
2. The grill does not reach temperature.
3. The grill heats unevenly.
4. The burners make popping noises.

BEFORE CALLING FOR SERVICE
If the grill does not function properly, use the following checklist before contacting your dealer for service. You may save
the cost of a service call.

15

Advertising