Numark Industries CDN-20S - Manual (Page 8)

CDN-20S
- The Leader in DJ Technology
©2000 Numark Industries - 8 - http://www.numark.com
DESCRIPTION OF THE PLAY/PAUSE, CUE, AND LOOP OPERATIONS
PLAY and CUE
Pressing the “PLAY/PAUSE” button starts the disc.
Pressing the “CUE” button will reset the disc to the
last place where the disc was started. This is
called the cue point. By alternately pressing the
“PLAY/PAUSE” button and the “CUE” button, the
disc may be returned and played from the cue point
any number of times. This function is called back
cue.
PLAY, PAUSE and CUE
EDITING CUE POINT
When the search button is tapped while a
cue point is set, a new cue point can be
located. The CD player will repeatedly play
small parts of the CD as you move it to the
desired position. By pressing
“PLAY/PAUSE” then “CUE” you can confirm
that this new cue point is desirable
USING THE LOOP
This function is repeating certain areas of the CD. Such as vocal stabs or for allowing the beginning of a song repeat
itself so you may leave the DJ console and interact directly with your crowd. To set a loop start point just press the
“LOOP” button while the CD is playing when it reaches the desired start point. To start looping press the “LOOP” button
again when the desired loop
end point is reached. Looping
is not seamless on this unit.
When it reaches the end point
again it returns to the start point
and continues to repeat this
action. When the “LOOP”
button is pressed again the CD
will continue on when it gets to
the end point.