Maintenance, Scheduled maintenance table – Nilfisk-Advance America SWEEPER SR 1100S B User Manual

Page 66

Advertising
background image

ENGLISH

USER MANUAL

16

146 2494 000(2)2007-02 A

SR 1100S B

MAINTENANCE

The lifespan of the machine and its maximum operating safety are ensured by correct and regular maintenance.
The following table provides the scheduled maintenance. The intervals shown may vary according to particular working conditions,
which are to be defi ned by the person in charge of the maintenance.
All scheduled or extraordinary maintenance procedures must be performed by qualifi ed personnel, or by an authorised Service
Center.
This Manual describes only the easiest and most common maintenance procedures.
For other maintenance procedures shown in the Scheduled Maintenance Table, refer to the Service Manual that can be consulted
at any Service Center.

WARNING!
To perform maintenance procedures, the machine must be off and, if necessary, the batteries must be
disconnected.
Moreover, carefully read all the instructions in the Safety chapter before performing any maintenance procedure.

SCHEDULED MAINTENANCE TABLE

Procedure

Upon delivery

Every 10

hours

Every 50

hours

Every

100

hours

Every

200

hours

Every

400

hours

WET battery fl uid level check

Side and main broom height check and adjustment

Dust fi lter cleaning and integrity check

Skirt height and operation check

Filter shaker operation check

(*)

Main broom driving belt visual inspection

(*)

Nut and screw tightening check

(*)(1)

Service and parking brake check and adjustment

(*)

Steering chain check and cleaning

(*)

Main broom driving belt replacement

(*)

Main motor and drive system motor carbon brush check or
replacement

(*)

(*) For the relevant procedure, see the Service Manual.
(1) And after the fi rst 8 running-in hours.

Advertising