Nokia 30 GSM - Manual (Page 24)

Copyright ©2002 Nokia. All rights reserved.
M
o
d
em
in
st
a
llat
io
n
fo
r Noki
a
3
0
t
erm
in
al
24
M
o
d
em
in
st
a
llat
io
n
fo
r Noki
a
3
0
t
erm
in
al ■ Create new Dial-up connection
After you have installed the modem driver required by your system, you can select the Nokia 30
terminal as your modem and start using it through a communications software application. For
example, MS Windows 95/98/2000/NT 4.0 includes communications applications such as Dial-Up
Networking and HyperTerminal. For set-up assistance, please refer to the user manuals for the
software you are using.
When using Dial-Up Networking with Windows 2000, a new dial-up connection must be specified for
each type of connection. The following steps apply equally to GPRS or HSCSD /CSD dial-up
connections.
1. In the Windows taskbar, press Start and select Settings and Control Panel.
2. In the Control Panel, select Network and Dial-up Connections.
3. Select Make New Connection.
4. In the Welcome to the Netwok Connection Wizard window, press Next.