NextBase TV700 User Manual
1. Turn on the unit and press the TV / AV IN button to choose the TV mode.
2. Push the DVB-T / ATV switch to choose the ATV antenna setting.
3. The CATV signal will be inputted automatically when the CATV cable is plugged in.
4. Press the AUTO SCAN button to automatically scan ATV channels. All the channels
found will be stored.
5. Press the CH+ button or the CH- button to get the channel you want.
AT V OPER ATIONS
1. Make sure this device s ATV system is matched with the territory
2. Please receive ATV signal with the Extendible Antenna, if using the unit out of doors.
3. In order to receive clearer image, please adjust the length, angle and direction
of the extendible antenna properly.