6-3 time format options (time format), 6-4 time display options (time display), 6-5 position display options (ll display) – NorthStar Navigation VHF Marine Radio Explorer 721US User Manual

Page 19: 6-6 course & speed display options (cog/sog)

Advertising
background image

19

Northstar Explorer VHF Series: 721US, 721EU Operation and Installation Manual

2-6-3 Time Format Options (TIME FORMAT)

Time can be shown in 12 or 24 hour format.

1. Select GPS/DATA, then SETTING.

2. Select TIME FORMAT.

3. Select 12 Hr or 24 Hr as desired. In this example, 12 hour format has been selected so the LCD shows

the AM or PM suffix.

2-6-4 Time Display Options (TIME DISPLAY)

If you’ve entered the time manually as described in the previous sections, the time is shown ALWAYS with
the prefi x M.

However, if the vessel’s position is being updated through a GPS navigation receiver, you can switch the time
display ON or OFF as follows:

1.

Select GPS/DATA, then SETTING.

2. Select

TIME

DISPLY.

3.

Select ON or OFF as desired. In this example,
OFF has been selected and so the LCD no
longer shows the time.

If the time display is set ON, course and speed data are NOT displayed on the LCD (see
section 2-5-6).

2-6-5 Position Display Options (LL display)

If you’ve entered the vessel position manually as described in the previous section, the vessel position is
shown ALWAYS with the suffi

x M.

However, if the time is being updated through a GPS navigation receiver, you can switch the vessel position
display ON or OFF as follows:

1.

Select GPS/DATA, then SETTING.

2.

Select LL DISPLAY.

3.

Select ON or OFF as desired. In this example,
OFF has been selected and the screen no
longer shows the vessel position.

2-6-6 Course & Speed Display Options (COG/SOG)

Use this option to display course over ground (COG) and speed over ground (SOG) data on the screen.

1.

Select GPS/DATA, then SETTING.

2. Select

COG/SOG.

3.

Select ON or OFF as desired. In this example,
ON has been selected, so the screen shows the
bearing and speed.

If COG/SOG is set ON, the time is NOT displayed on the screen (see section 2-5-4).

GPS/DATA

TIME OFFSET

TIME FORMAT

> TIME DISPLY

TIME DISPLY

ON

> OFF

GPS/DATA

TIME FORMAT

TIME DISPLY

> LL DISPLAY

LL DISPLAY

ON

> OFF

GPS/DATA

TIME DISPLY

LL DISPLY

> COG/SOG

COG/SOG

> ON

OFF

GPS/DATA

MANUAL

> SETTING

SETTING

TIME OFFSET

> TIME FORMAT

TIME DISPLAY

TIME FORMAT

> 12 Hr

24 Hr

07:15AM LOC

Advertising