Nady Systems GEQ 231 - Manual (Page 9)

Equalizer:
Equalizer Control Bands
1X31, 1/3 Octave ISO Spacing From 20Hz to 20KHz
2X31, 1/3 Octave ISO Spacing From 20Hz to 20KHz
2X15, 2/3 Octave ISO Spacing From 25Hz to 16KHz
Filter Type
Constant Q
Slider Travel
20mm (Center Detent) for GEQ 131/215/231
60mm (Center Detent) for GEQ 131LF/215LF
Level Control Range
+/-6dB or +/-12dB (Selectable)
Inputs:
Type
Active Balanced/Unbalanced
Connectors
3-P XLR, 1/4" TRS (Balanced), RCA (Unbalanced)
Impedance
20K Ohms Balanced; 15K Ohms Unbalanced
Maximum Level
+/-18dBV
Outputs:
Type
Active Balanced/Unbalanced
Connectors
3-P XLR, 1/4" TRS (Balanced). RCA (Unbalanced)
Impedance
Typically < 600 Ohms
Maximum Level
+/-16dBV
Clip LED Threshold
5dB (Below Clipping)
Low Cut (High Pass) Filter
(GEQ 131/131LF/231)
10Hz to 250Hz (12dB/Octave), variable
(GEQ 215LF)
40Hz (12dB/Octave), switchable
Low Pass (High Cut) Filter
(GEQ 131/131LF/231)
3KHz to 50KHz (12dB/Octave), variable
(GEQ 215LF)
16KHz (12dB/Octave), switchable
Frequency Response
20Hz – 20KHz, +/- 1dB
THD + Noise
<0.02% (@ 1KHz, all faders at mid position)
Signal to Noise Ratio
93dB (@ 1KHz)
Channel Separation
60dB (1KHz)
Line Voltage
100-130V AC, 50/60Hz
200-240V AC, 50Hz
Power Consumption
Maximum: 15 watts
Size:
19"W X 3.5"H X 8.66"D (2U)
(48.2cm X 8.8cm X 22.0cm) For GEQ 131LF/
215LF/231
19"W X 1.75"H X 8.66"D (1U)
(48.2cm X 4.4cm X 22.0cm) For GEQ 131/215
Weight:
6.16lbs. (2.8Kg.) GEQ 215
6.38lbs. (2.9Kg.) GEQ 131
7.04lbs. (3.2Kg.) GEQ 131LF
7.7lbs. (3.5Kg.) GEQ 215LF
11.44 lbs. (5.2Kg.) GEQ 231
For improvement purposes, all specifications and
design are subject to change without notice
SPECIFICATIONS
9