NEC NDR50 - Manual (Page 23)

DVR HOOKUP
23
Before Operation (Continued)
MPEG
PCM: Select when connected to a 2-channel digital
stereo amplifier. The DVD Recorder’s digital audio out-
puts sounds in the PCM 2ch format when you play a
DVD video disc recorded on the MPEG2 recording
system.
Bitstream: Select “Bitstream” if you connected the DVD
Recorder’s DIGITAL OUT jack to a MPEG decoder (or
an amplifier or other equipment with a MPEG decoder).
Sampling Frequency
If your receiver or amplifier is NOT capable of handling
96 kHz signals, select 48 kHz. When this choice is
made, this unit will automatically convert any 96 kHz
signals to 48 kHz so your system can decode them.
If your receiver or amplifier is capable of handling
96 kHz signals, select 96 kHz. When this choice is
made, this unit will pass each type of signal through
without any further processing.
DRC (Dynamic Range Control)
With the DVD format, you can hear a program’s sound-
track in the most accurate and realistic presentation
possible, thanks to digital audio technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the quietest ones). Then, you may listen to a movie
at a lower volume without losing clarity of sound. Set
DRC to ON for this effect.
Vocal
Set Vocal to ON only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.
48KHz
96KHz
Dolby Digital
DTS
MPEG
Sampling Freq.
DRC
Vocal
OFF
ON
Setup
Language
Audio
Lock
Recording
Disc
Dolby Digital
DTS
MPEG
Sampling Freq.
DRC
Vocal
Dolby Digital
DTS
MPEG
Sampling Freq.
DRC
Vocal OFF
ON
Bitstream
PCM
Dolby Digital
DTS
MPEG
Sampling Freq.
DRC
Vocal