National Geographic IN102TOP - Manual (Page 4)

)
12. [MEMORY] - BUTTON
Displays max./min. information for indoor temp, relative humidity, and barometric
pressure
Introduction
Thank you for purchasing the IN102 Deluxe Weather Station With Forecasting. Developed
with state-of-the-art technology and digital electronics, this precision device provides
instant readouts for time and date, indoor temperature, humidity, barometric pressure,
and weather-forecasting icons.
Battery Installation
Release battery compartment panel by pulling down on the silver rectangle. Insert two AA
batteries according to polarity indicated.
Note: Replace batteries when the BATTERY LOW INDICATOR lights up.
Setting Clock and Calendar
1. Press and hold the [CLOCK] button for two seconds to enter clock/calendar mode.
2. The setting sequence for the clock calendar mode is 12/24 hour, language, hour,
minute, second, year, month, date.
3. Use the [±] and [²] button to adjust setting values and then press [CLOCK] button to
confirm each setting.
Multi-language Day of Week
The display language for the day of the week is selected in the Clock Calendar mode and
will flash in the “day of week” box. The language format is as follows:
EN-English GE-German FR-French IT-Italian SP-Spanish
Alarm Setting
1. Press and hold the [ALARM] button for two seconds to enter daily alarm setting.
2. When in alarm time mode ʻALʼ will flash beside time.
3. Use the [±] and [²] button to adjust the hour and minute settings after each setting
press [ALARM] button to confirm each setting.
Activating Daily Alarm and Snooze Function
1. To activate alarm press the [AL/SNZ] button once and alarm icon “
” will appear
beside the time. Alarm will sound at set time.
2. When alarm sounds it will beep for one minute increasing from one beep per second to
constant beeps.
3. If the “ ” is displayed on screen alarm is set and will sound at programmed time. In
order to use the snooze function both the alarm icon and snooze icon “Z
zz
” must both
be displayed beside the time before the alarm sounds
4. When the alarm sounds you have two options:
a. To activate snooze function press the [SNOOZE] button on the back of the unit. Alarm
will sound again in five minutes.
b. To turn off alarm completely press the [AL/SNZ] button until both alarm “ ” and
snooze “Z
zz
” icons disappear.
Note: The five minute snooze alarm will repeat as many times as desired as long as the
[SNOOZE] button is pressed after each alarm sounds. In order to turn alarm off the [AL/
SNZ] button must be pressed until all alarm icons disappear.