NEC Express 456-01721-000 - Manual (Page 13)

-9-
Figure 5. Cutting the Exterior Shipping Straps
3. Remove the ramp. The ramp is in two pieces that are held
together by a bolt. Unbolt the two pieces. Behind the ramp is
an accessory box, which contains various components and
documentation. Remove the box and set it aside for later use.
4. Construct the ramp by inserting the bevel in the smaller ramp
piece into the larger ramp piece. Set the ramp aside to use
when you remove the cabinet from the pallet.
5. Remove the cardboard pieces of packing material
surrounding the cabinet (see
Figure 6 ). These pieces include
two C-fold sleeves around the sides of the cabinet and a cap
at the top.
hsys035